Timbo
July 23rd, 2002, 05:55 PM
Hi all. thought I would toss this up for all those who have been wanting higher default voltages for their P4s but have been reluctant to do the VID Pin Mod or the Pin 7 POT Mod.
This little trick will take care of not having to do both. As you know the VID Pin Mod requires the connection of the VID puns located on the P4. This is done via the use of small thin wires twisted and gently wrapped around the pins. The pins needed to be done can be seen in the illistration below: :)
This little trick will take care of not having to do both. As you know the VID Pin Mod requires the connection of the VID puns located on the P4. This is done via the use of small thin wires twisted and gently wrapped around the pins. The pins needed to be done can be seen in the illistration below: :)