PDA

View Full Version : what's wrong with this picture?



LA_MERC_Sabre
February 10th, 2005, 01:00 PM
Ok, it took me about 3 seconds to see what was wrong with this picture. Although, I did graduate from LATECH, which puts me and a few others around here at a distinct advantage. But you others can probably figure it out too...

LA_MERC_goose
February 10th, 2005, 01:03 PM
I'm going to go with the welds they look unsafe and the guy bending over is cute too ;D :shootme:

LA_MERC_Cowboy_From_Hell
February 10th, 2005, 01:25 PM
about 8 seconds...











































LOL!!! the door opens OUT!!!

LA_MERC_LaTech
February 10th, 2005, 01:37 PM
3 seconds or so, and that was my answer too

LA_MERC_Cowboy_From_Hell
February 10th, 2005, 01:53 PM
I'm going to go with the door


OMG!!! HAX!!!!

YOU CHANGED YOUR ANSWER!!!!!!

LOLOLOLOLOL!!!!!

:twak :loser1

}{y|3ri|)
February 10th, 2005, 01:54 PM
oomg i saw it too he said something about the weilding!!! pwned goose lol!

LA_MERC_Sabre
February 10th, 2005, 02:01 PM
lmao Goose!!!! there are times when I wish you had to wait at least 30 minutes before editing a post....lol

LA_MERC_goose
February 10th, 2005, 02:13 PM
WHAT !
WHAT ARE YOU TALKING ABOUT!







lol I didn't notice the door, I was thinking safety issues.

LA_MERC_Sniper
February 10th, 2005, 03:27 PM
what are you talking about he didnt change anything look again hehehe

LA_MERC_Captain_Obvious
February 10th, 2005, 04:33 PM
haha

[sG] Dutchman
February 10th, 2005, 04:34 PM
it took me 1 sec to notice they could get thorugh that dorr god you guys are slow...........

LA_MERC_LaTech
February 10th, 2005, 04:37 PM
It is pretty easy to tell....once you read the whole thread!!!!

LA_MERC_T4rg3T
February 10th, 2005, 05:24 PM
Dutchman']it took me 1 sec to notice they could get thorugh that dorr god you guys are slow...........


It took you 1 sec to notice that they "could" get through that door?

Just who are YOU calling slow? hahah

LA_MERC_Nutria
February 10th, 2005, 05:29 PM
Well technically they can get through that door.... torch is hanging over the rail. lol :stick

Apocalypse
February 10th, 2005, 05:40 PM
there's an asian man on the roof of that building!!!!

LA_MERC_M@lACHi
February 10th, 2005, 06:12 PM
LOL@ Sniper!

LA_MERC_Sabre
February 11th, 2005, 06:01 AM
hehehe,

I think one of them is wearing an Aggie graduation ring!

LA_MERC_LaTech
February 11th, 2005, 09:35 AM
http://www.lamerc.com/uploads/dumbpost.JPG

LA_MERC_Andyconda
February 11th, 2005, 12:03 PM
I saw emmidiately that the door hinges were on this side with the I beams and that would make getting through the door very (well impossibly) hard. Looks like they went through 2 previous locations as well if you look at the weld marks on the side beams. The good thing I noticed is they don't have to worry about the safety light above the door having good batteries as no one will be coming through the door soon, lol. But you guys need to realize that the air handling unit is in a crane cradle and it will be slid out to the left when put in place so they aren't as messed up as the picture would indicate.

LA_MERC_Andyconda
February 11th, 2005, 12:04 PM
woop, I meant immediately, spelling is not my fortey as I ARE ENGINEER and they be no spell check on froum

Fragmonkee
February 13th, 2005, 12:03 PM
ROTF.

Fragmonkee
February 13th, 2005, 12:05 PM
hey LaTech..i stole your kitten pic. GAWD that is the funniest thing since john candy.

texan
February 13th, 2005, 01:41 PM
lol

42d3e78f26a4b20d412==