help me find Rcon

[[sG] Dutchman]

ok i'm trying to look for the mod Rcon for counterstrike any help finding it for me all I find it code stuff I remebr it was a program the pops up adn you can edit stuff for your server help me find Rcon!

[[sG] Dutchman]

oh and how do I setup my router so people can play on my server?

[npor]

You're going to need AdminMod or AMX to give privlages to people to gain access to rcon.

[SnAkEbItE]

Rcon is built into Cstrike it's simple commands that you gain access to via setting up a rcon password. The simplest way to controll a server via rcon is HLSW.

As for the router if your trying to run a server from your house you will need to forward what ever port you assign you server normaly default to 27015 on your router to machine ip that is hosting server.

[npor]

UDP/TCP 1200
UDP/TCP 27000 to 27015
UDP/TCP 27030 to 27039

Those are ports used for CS.

[[sG] Dutchman]

ok thx npor and snakebite :)

[[sG] Dutchman]

what am I doing wrong i just installed amx mod for my deciated server i satrt the server up I go on and it doesn't work nothing happens help

[[sG] Dutchman]

I forgot how to change the port what do I do or I mean I don't know how to get router setup thing to cahnge my ports

[CajunTech]

what type of router do you have?

[SnAkEbItE]

Also you have to have metamod installed as well.

[[sG] Dutchman]

I have a BEFSR41 router cajun :) and I still can't figure out how to install those mods :shootme: :dunno I did everything it said to do but nothing happeneds

[CajunTech]

I can't help much with the CS server, but I can help you configure the router. Shoot me a PM with your number if you need help and I can give you a call this week.

[SnAkEbItE]

That's a linksys router and you have to go through the web controll pannel and goto the advanced tab, there is a option there for forwarding there is where you point the port you wish to open to the pc where your running the server via it's IP.


As for the mods, you have to install metamod make sure you edit your gamlib file. Then you have to tell it to load up amx or what ever your running in the ini file.

[[sG] Dutchman]

ok I installed metamod and statsme and when I start up my deaciated server this eeor pops up "host_error: couldn't get DLL API from .c\cstrikedllsmetamoddll!" whats that mean I do have it in there along with the statsme_mm.dll and mp.dll and metamod.dll help me

[[sG] Dutchman]

oops I know what I did wrong compare on little slash make a big difference
(old).c\cstrikedllsmetamoddll!"
(new).c\cstrike/dllsmetamoddll!"

[[sG] Dutchman]

I HAVE NO CLUE WHAT I AM DOING WRONG I FOLLOW THE DIRECTION AND IT STILL WON"T WORK!! anyone want to call me i'll pm them with my phone#

[[sG] Dutchman]

or gon on aim my aim screen is counterm7

[[sG] Dutchman]

ok I got my mod installed on my server it looks great but now what ports do I need to forward on my router (BEFSR41 v.2)

[npor]

ok I got my mod installed on my server it looks great but now what ports do I need to forward on my router (BEFSR41 v.2)

I posted it on the first page.

UDP/TCP 1200
UDP/TCP 27000 to 27015
UDP/TCP 27030 to 27039

Those are ports used for CS.

[[sG] Dutchman]

ok thx npor i'll do that today sometime :)

[[sG] Dutchman]

DO I have to do anything with my firewall built in my router or no?if so what do I do?

[npor]

If you disable your router firewall, you won't need to forward the ports. If you keep it enabled (I cant turn mine off on my Netgear), you need to forward those ports.

[[sG] Dutchman]

great news my dad is going to forward the ports tomorrow then my server will be up!!! wahoooo! if ya'll want my ip its 192.168.1.101:27015 but will hopefully be up around or before 12:00 PM tomorrow :) :) :) :) :D :D :D :D

[LA_MERC_LaTech]

Dutch,

Any 192.168.X.X number is a subnet (meaning, that's the IP of the computer on the LOCAL side of your Router. You will have to give people the router's IP address for people to be able to play.

LT

[LA_MERC_MadMAX]

go to www.whatismyip.com and tell us THAT IP addy.

[LA_MERC_M@lACHi]

Well, I will give him this much...he is trying. We'll get him learnt yet!

[[sG] Dutchman]

OHHHHHHH OK OK i got it now hehehe everyone is not that perfect even for the first time I think i'm doing good what do you think?? hehehe

[[sG] Dutchman]

I have to wait till my sister gets up then I can tell you guys what it is (server on sisters computer good thing she only goes on the internet instead of downloading suff :) )

[[sG] Dutchman]

ok heres my router ip address 24.223.193.190 I type it in 24.223.193.190:27015 but it said my server was not responding but I still have to forward my ports so would my ip address for my server would be 24.223.193.190:27015?

[[sG] Dutchman]

I found the routers IP,but how do I forward the
UDP/TCP 1200
UDP/TCP 27000 to 27015
UDP/TCP 27030 to 27039

Not sure how to do this or where to enter it!

[LA_MERC_M@lACHi]

In your router config screen, look for port forwarding.

You will enter in the ports and then the specify the protocol and the specify the server's internal IP address.

So basically it would look like this:

Ext Port Protocol IP Address
1200 to 1200 TCP UDP 192.168.1.101
27000 to 27015 TCP UDP 192.168.1.101
27030 to 27039 TCP UDP 192.168.1.101

You need to verify which protocols need to be enabled for each port range you open. Don't need to open more than you have to.

[[sG] Dutchman]

it still is the same ip 192.168.1.100:27015 see if you guys can connect

[npor]

For my router, its under your settings.

If your local ip was 192.168, then go to IE or Mozilla and type this in the browser

192.168.0.1 and when it asks for username/password use admin/password.

[[sG] Dutchman]

ok I forwarded my ports I started play on my server no comes on any want to give it a try and come on my server it think the ip of my router is 24.223.193.190:27015 or 192.168.1.101:27015 try both of them see if you get a server poing up then try and see if you can connect the server is called -={oek}=- 1.6 Clan Server

[[uGa] Saint]

i tried both those ips and got nada.... sorry man

[[sG] Dutchman]

god what am I doing wrong

[npor]

Try it without the router first, see if that is the prob.

[[sG] Dutchman]

grrr I forwarded the port again then people still can't join and for the ip what ip do I use????? router or local???? help......oh and do I go on the computer with the router or go to my other computer with the server on it to forward the ports?

[LA_MERC_M@lACHi]

For people to connect to your server, you need to tell us the external IP address. The one that the ISP assigns to the WAN port of your router. An IP address that starts out 192.168.x.x cannot be seen on the internet, those are your private IP addresses that your router assigns to your computers on the network and will do us no good. It does not matter which computer you use to manage the router. Have you "enabled" the ports that you forwarded? Give us a screen shot of your port forwarding screen.

[LA_MERC_MadMAX]

like I said earlier - go to http://www.whatismyip.com and tell us that number.

[[sG] Dutchman]

24.223.193.190 thats the number (or ip) madmax and how do I do a screenshot i tried it with my digital camera but it has tons of lines and malachi I did click the TCP/UDP boxs and the enable box

[[sG] Dutchman]

1200 to 1200 TCP(box checked marked) UDP(box checked marked) 192.168.1.101 enable(box checked marked)
27000 to 27015 TCP(box checked) UDP(box checked marked) 192.168.1.101 enable(box checked marked)
27030 to 27039 TCP(box checked) UDP(box checked marked) 192.168.1.101 enable (box checked marked)


thats what it looks like excecpt the box checked ( stands for [checkmark]

[LA_MERC_T4rg3T]

Please try to search the website of the company that makes the program. Almost every free program/mod has a support forum with very helpful information. Try searching for the information there first. Take your time to understand the information before posting here. This thread is 3 pages long so far but most of it could have been dealt with on the first page. I'm sure most people do not mind helping but try to help yourself first. You've posted right at 24 times in this thread alone. Everyone has provided very useful information and the same information multiple times. Please read their post very carefully before asking for the information again.

http://steampowered.custhelp.com/cgi-bin/steampowered.cfg/php/enduser/std_adp.php?p_faqid=160&p_created=1093381261&p_sid=75mYVFrh&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX 3Jvd19jbnQ9MjAmcF9zZWFyY2hfdHlwZT1zZWFyY2hfbmwmcF9 wcm9kX2x2bDE9JnBfY2F0X2x2bDE9JnBfY2F0X2x2bDI9JnBfc GFnZT0xJnBfc2VhcmNoX3RleHQ9cG9ydHM*&p_li=

[[sG] Dutchman]

oops sorry illegal i'll read more carefully and thx for the info. and I do as you said :) :) god you are smart :rolleyes:

[LA_MERC_T4rg3T]

I'm not that smart, I've just been through it a few times. You should always work with one step at a time.

1st - Get a default server up and running. The link I posted earlier should help you with the ports issue.
2nd - Make sure people are able to join it from outside of your local lan
3rd - Add metamod and make sure the server still starts and runs fine and people are still able to join
4th - Add in additional mods (adminmod, amx mod, etc..)

[[sG] Dutchman]

ok I think this is my ip 24.223.193.190:27015 (server ip)

[LA_MERC_T4rg3T]

ok I think this is my ip 24.223.193.190:27015 (server ip)


You need to find out before you make any more post, there seems to be no server located at that address/port. Find out what the ip is and get one of your friends on aim to try to join it. Get someone to help you one on one and it will save you tons of time and post.